Is the Volcano Digital Still Made? Digit vs Hybrid

What happened to the Volcano Digit, what replaced it, and what to do if you still own one — from an authorized Storz & Bickel reseller since 2009.

Short answer: no. The Volcano Digit — often called the Volcano Digital — was discontinued in August 2019 and replaced by the Volcano Hybrid. If you’re finding it hard to buy new, that’s why. The good news for existing owners: a Digit is a Volcano, and Volcanoes last. Plenty of them are still running fine a decade in.

This guide covers what the Digit actually was, exactly what the Hybrid changed, whether it’s worth holding onto yours, and the one thing to be careful about if you’re tempted by a used or “refurbished” unit.

What the Volcano Digit was

The Digit was the digital-display version of the Volcano, sold alongside the analog Volcano Classic. Same iconic heating block, same balloon system, same hand-assembled German build — the difference was the control panel. Where the Classic uses a dial, the Digit gave you a numeric LED readout and button control, so you could set a precise temperature instead of a dial position.

That precision was the whole appeal. It’s also why the Digit developed a following among people who wanted repeatable, exact temperatures — and why “volcano digital” is still a search people make years after it left the catalogue.

What the Hybrid changed

The Hybrid wasn’t a facelift. Three of the changes are substantial:

Heat-up went from minutes to seconds. This is the big one. The Volcano Classic takes about 5 minutes to reach 356°F, and the Digit was in similar territory. The Hybrid reaches the same temperature in about 40 seconds. That isn’t an incremental improvement — it changes how you use the machine.

It added a whip. The Digit was balloon-only. The Hybrid does balloons and a tube (whip), so you can draw directly without filling a bag. For a lot of owners that’s the single most-used new feature — balloons for sessions, tube for a quick one.

It added hybrid heating. The Classic is pure convection. The Hybrid combines convection and conduction through a Double Helix Heat Exchanger, which is why it extracts more efficiently — noticeably fewer bags to finish the same load.

On top of that: a touch display instead of buttons, tighter temperature precision, and Bluetooth with the S&B Web App for adjustment and firmware updates.

Digit vs Hybrid: Side-By-Side Comparison

	Volcano Digit (discontinued)	Volcano Hybrid (current)
Heat-up to 356°F	~3–5 minutes	~40 seconds
Temperature range	104–446°F	104–446°F
Heating	Convection	Convection + conduction
Vapor delivery	Balloon only	Balloon and whip
Display	LED + buttons	LCD touch display
App / Bluetooth	No	Yes
Filling chamber	6.5 cm³ (~600 mg)	6.5 cm³ (~600 mg)
Status	Discontinued Aug 2019	In production

Hybrid figures are Storz & Bickel’s published specifications. Digit figures come from secondary sources — S&B no longer publishes specs for discontinued models, so treat them as approximate.

Where the Volcano Digit sat between the Classic and the Hybrid

Worth being clear about, because it’s the thing people get muddled on: the Digit was not a step up from the Classic in raw performance. Same heating system, same 6.5 cm³ chamber, same balloon system, same build. What differed was the control panel — and one consequence of it that matters more than people expect.

The digital control gave the Digit a wider usable temperature range. The Volcano Classic’s dial bottoms out at 266°F. The Digit — like today’s Hybrid — could be set as low as 104°F. If you run low-temperature sessions for flavour, that’s a real functional difference, not a cosmetic one, and it’s the reason some Digit owners have never wanted to “downgrade” to a Classic.

So if you own a Digit and you’re wondering whether the Classic is an upgrade: it isn’t. On temperature range it’s a step backwards. The upgrade path from a Digit is the Hybrid, which keeps the full 104–446°F range and improves everything else.

If you’re choosing between the two current models rather than replacing a Digit, our Volcano Classic vs Hybrid guide covers that decision properly.

You own a Digit — should you keep it or replace it?

Keep it if it works. Volcanoes are built to last a decade or more, and a functioning Digit still makes excellent vapor. Nothing about the discontinuation stops yours working, and the Easy Valve and Solid Valve balloon systems are still made — so replacement bags and valves remain easy to get. Our replacement bags and valves guide covers which system you have and how to swap it.

Still dialling in your settings? Our Volcano temperature chart applies to the Digit exactly as it does to the Classic — same heating system, same numbers.

Consider replacing it if you’re tired of the wait — going from a five-minute warm-up to forty seconds is the change owners notice most — or if you want the whip, or you’re running into repair costs on an aging unit.

One thing that matters more than people realise: a discontinued device eventually runs out of serviceable parts, and Storz & Bickel’s warranty explicitly excludes normal wear and tear and unauthorized repairs. Once a Digit is out of coverage, every fix is on you.

⚠️ Before you buy a used or “refurbished” Digit

There’s a secondary market in used and refurbished Digits, and it looks tempting — often a few hundred dollars for a legendary machine. Two things to know first, both straight from Storz & Bickel’s warranty terms:

Refurbished products are excluded from the warranty. S&B’s conditions name them directly. A refurbished Digit has no manufacturer coverage, whatever the seller implies.

A device already registered by a previous owner cannot be re-registered. So even if a used unit were otherwise eligible, you can’t put it in your name to claim the extended coverage. And S&B’s warranty does not apply to products bought from an unauthorized dealer — its terms specifically name eBay, Amazon and Facebook Marketplace.

Put together: a used Digit is an out-of-warranty, unregisterable, discontinued machine with no parts guarantee. That can still be a fine purchase if you know it and the price reflects it. It is a bad purchase if you thought you were getting a Volcano with a warranty.

For the full picture of what’s covered and how registration works, see our Storz & Bickel warranty guide.

What to buy instead

If you’re replacing a Digit, you have two genuine options:

• Volcano Hybrid — the direct successor and the real upgrade. Forty-second heat-up, balloon and whip, hybrid heating, app control. If the Digit’s precision is what you liked, this is the machine that does it better in every dimension.
• Volcano Classic — if you never used the digital precision and just want the timeless Volcano experience at a lower price, the Classic is the same legendary machine with a dial. Do check the temperature range first, though: the Classic starts at 266°F, so if you regularly ran your Digit below that, the Hybrid is the one that matches what you’re used to.

Both are genuine, both carry the full manufacturer warranty with registration, and both are the current production models — which means parts and service for years to come.

👉 Shop the current Volcano lineup »

Frequently asked questions